HAND CASE NECK TURNER

Gain the most consistency out of your handloads by removing as many variables as possible. Neck turning your brass peels brass from the outside of the case neck to give it a consistent thickness. The RCBS Hand Case Neck Turner is the perfect tool for the job!

The RCBS® Hand Case Neck Turner is designed to peel brass from the outside of a case neck to a consistent thickness. This step is important because most commercially available brass has variances in neck thickness. This variance can lead to case neck concentricity and bullet run-out issues. Truing up the case neck with our Hand Case Neck Turner produces more consistent and accurate hand-loaded ammunition. The cutter portion uses caliber-specific pilot/mandrels (sold separately) to guide the case neck. The cutter design can zero the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005-inch increments. The cutter can also be set for right or left-handed use. If you are trying to get the most accuracy and consistency possible out of your hand-loaded ammunition try turning your case necks.

• Adjustable to .0005 inch increments
• Ambidextrous for right or left hand users
• Caliber Specific Pilots and Mandrels (sold separately)
• Innovative cutter design that can zero the cutter to the pilot/mandrel and then adjust to desired neck thickness